Solvent-, silicon- and isocyanate-free ready to use one-component adhesive for elastic installation of different wood floorings, e.g. solid and engineered wood flooring, prefinished wood flooring in a variety of thicknesses as parquet, plank or strip. Also suitable for sensitive and hard to adhere woods, please contact our Technical Service Department. Suitable for installation on cement-based screed, calcium sulfate-based screed, asphalt mastic screed, wood chipboards and substrates prepared with suitable Kiesel leveling compounds.
Suitable for various types of parquet/wood flooring; as mosaic parquet, engineered wood from 16 mm thickness with tongue and groove, industrial parquet 10 - 23 mm, wood block RE (DIN 68702) with a max. height of 50 mm, prefinished 2-, 3- and multi-layered in boards and planks, solid wood flooring from 15 mm thick (thickness to width ratio max 1:10) up to a length of 270 cm.
Bamboo flooring (except Stranded Bamboo). Solid wood must be straight and flat. Strip flooring, shorts and planks. Existing stone, ceramic and terrazzo must be combined with Okapox GF and silica sand spread (please note that in this case the adhesive consumption will increase). Contact Kiesel technical department.
When using as a moisture barrier up to 92 % RH (using an in-situ probe) use a flat trowel and create a moisture skin barrier to a unified layer without any pinholes or breaks with at least 2 mm thickness. Wait minimum 12 hours or until it is cured before installation of recommended coverings.
Contact Kiesel technical department when installing any kind of exotic wood.
For installations over cement screed, calcium sulphate screed (flowing), particleboard V 100 E1, OSB boards, use suitable Kiesel leveling compounds.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.